How to use the ice machine? Many businesses use the ice machine improperly after buying it back, which greatly reduces the service life of the ice machine, but also affects their business. The ice maker needs to be maintained in daily use. The correct use of the ice maker can extend its service life. So what should we pay attention to when using the ice maker? Here is a detailed introduction for you.
Precautions for use of ice machine
1. The main body of the ice machine is divided into two chambers, one is the transpiration chamber (copper tube) with certain density, which is the thing of refrigeration.
2. The gap between the back and the left and right sides of the ice maker shall not be less than 30cm, and the gap at the top shall not be less than 60cm. Independent power supply shall be used, special line power supply shall be provided, fuse and leakage maintenance switch shall be equipped, and it shall be firmly grounded.
3. The ice maker shall be installed in a place with outstanding ventilation, and the ambient temperature shall not exceed 35 ℃, so as to prevent the excessive ambient temperature from causing poor heat dissipation of the condenser and affecting the ice making effect. The ground of the ice maker of the device shall be solid and flat, and the ice maker must adhere to the level, so as to prevent non deicing and noise during operation.
4. When transferring the ice maker, be careful to handle it with care to prevent a violent sensation. The transfer slope should not be less than 45 degrees. After long-distance transportation, the ice maker should be placed for 2-6 hours before starting to make ice.
5. The best way to make ice machine is to use independent power supply, special line power supply, equipped with fuse and leakage maintenance switch, and firmly grounded.
6. The ice maker must unscrew the water inlet hose head for two months, clean the filter screen of the water inlet valve, and prevent the sand and mud impurities in the water from blocking the water inlet, which will cause the water inlet to become smaller and lead to no ice making.
7. The ice maker must clean the dust on the surface of the condenser every time. Poor condensation and heat dissipation will cause damage to the compressor components. When cleaning, use a vacuum cleaner, a small brush, etc. to clean the oil dust on the condensation surface. It is not allowed to use sharp metal things to clean, which will damage the condenser.
8. The water pipe, water tank, refrigerator and maintenance film of the ice maker shall be cleaned every two months. When it is not used, it shall be cleaned, and the water in the ice mold and the box shall be dried by the electric blower. It shall be placed in the place without corrosive gas and dry ventilation to prevent outdoor storage.
9. When cleaning the ice maker, turn off the power supply, forbid to wash the ice maker with water pipe directly on the body, use neutral detergent to wipe it, forbid to wash the ice maker with acid, alkaline and other corrosive solvents.
10. When the ice maker is not in use, it shall be cleaned and dried with an electric blower. It shall be placed in a dry and ventilated place to prevent direct sunlight in the open air.
